HP UX Internet and Networking Software manual Alertnumber, Rtmoverflow through numalerts

Administration Commands

query_3270_diag

Maximum number of 3270 user alerts for which data should be returned. You can specify 1 to return data for a specific 3270 user alert, a number greater than 1 to return data for multiple 3270 user alerts, or 0 (zero) to return data for all 3270 user alerts.

The default for this command indicates “return all entries,” unlike other query_* commands for which the default is to return a specific entry.

list_options

The position in the list of alerts from which SNAplus2 begins to return data.

Specify one of the following values:

FIRST_IN_LIST

Start at the first entry in the list

LIST_INCLUSIVE

Start at the entry specified by the alert_number parameter

LIST_FROM_NEXT

Start at the entry immediately following the entry specified by the alert_number parameter

If no alerts have been defined, this parameter must be set to FIRST_IN_LIST (or the -aoption must be specified on the snapadmin command line, which sets FIRST_IN_LIST).

alert_number

The number of the alert for which information is required, or the number to be used as an index into the list of alerts. Specify a number in the range 1–20. This parameter is ignored if list_options is set to FIRST_IN_LIST.

2.98.2 Returned Parameters

Parameter name	Type	Length
rtm_overflow	constant
rtm_unbind	constant
rtm_timer_option	constant
rtm_thresh1	decimal
rtm_thresh2	decimal
rtm_thresh3	decimal
rtm_thresh4	decimal
num_alerts	decimal
{alert_3270_data}
description	character	51	(null string)
parameter1	character	31	(null string)
parameter2	character	31	(null string)
parameter3	character	31	(null string)

(Up to 20 alert_3270_data subrecords can be included.)

rtm_overflow through num_alerts

The 3270 diagnostics information. For information about these parameters, see Section 2.9, define_3270_diag.

For each alert, an alert_3270_data subrecord is included. For information about the parameters used in this subrecord, see Section 2.9, define_3270_diag.

2.98.3 Error Return Codes

If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.

295