Administration Commands
deactivate_conv_group
lu_alias
LU alias of the local LU. This alias is a character string using any locally displayable characters. This parameter is used only if lu_name is not specified.
If lu_name and lu_alias are not specified, the command is forwarded to the LU associated with the CP (the default LU).
conv_group_id
Conversation group identifier for the session to be deactivated.
type
Type of deactivation. Possible values are:
DEACT_CLEANUP
Deactivate the session immediately, without waiting for a response from the partner LU.
DEACT_NORMAL
Do not deactivate the session until all conversations using the session have ended.
sense_data
If type is set to DEACT_CLEANUP, the sense_data parameter specifies the sense data to be used when deactivating the session (specified as a
2.6.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.6.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
DEACT_CG_INVALID_CGID
The conv_group_id parameter did not match any valid conversation group ID.
INVALID_CLEANUP_TYPE
The type parameter was not set to a valid value.
INVALID_LU_ALIAS
The lu_alias parameter did not match any defined LU alias.
INVALID_LU_NAME
The lu_name parameter did not match any defined LU name.
53