Administration Commands
query_dlur_pu
num_entries | decimal |
| 1 |
list_options | constant |
| SUMMARY + LIST_INCLUSIVE |
pu_name | character | 8 | (null string) |
dlus_name | character | 17 | (null string) |
filter | constant |
| NONE |
Supplied parameters are:
num_entries
Maximum number of DLUR PUs for which data should be returned. You can specify 1 to return data for a specific DLUR PU, a number greater than 1 to return data for multiple DLUR PUs, or 0 (zero) to return data for all DLUR PUs.
list_options
The level of information required for each entry and the position in the list of DLUR PUs from which SNAplus2 begins to return data. The list is ordered by pu_name.
Specify the level of information required with one of the following values:
SUMMARY
Summary information only
DETAIL
Detailed information
Use a + character to combine this value with one of the following values:
FIRST_IN_LIST
Start at the first entry in the list
LIST_INCLUSIVE
Start at the entry specified by the pu_name parameter
LIST_FROM_NEXT
Start at the entry immediately following the entry specified by the pu_name parameter
pu_name
Name of the PU for which information is required, or the name to be used as an index into the list of PUs. This value is ignored if list_options is set to FIRST_IN_LIST. The name is a
dlus_name
Name of the DLUS for which PU information is required. To list only information about PUs associated with a specific DLUS, specify the DLUS name; a PU will be listed only if it has an
Specify
filter
Specifies whether to filter the returned PUs according to their location. Possible values for network node are:
INTERNAL
Return information only about internal PUs.
DOWNSTREAM
Return information only about downstream PUs.
