Administration Commands
query_ls
remote_ip_host | character 100 |
ack_timeoutdecimal
max_retrydecimal
liveness_timeoutdecimal
short_hold_modeconstant
If the command executes successfully and you specified DETAIL as the list_options parameter value, SNAplus2 returns the following parameters:
ls_name
Link station name.
dlc_type
Type of the DLC. Possible values are:
SDLC
Synchronous data link control
X25
X.25 QLLC (qualified link level control)
TR
Token Ring
ETHERNET
Ethernet
FDDI
Fiber distributed data interface
HPRIP
Enterprise Extender (HPR/IP)
state
State of this link station. Possible values are:
ACTIVE
The LS is active.
NOT_ACTIVE
The LS is not active.
PENDING_ACTIVE
The LS is being activated.
PENDING_INACTIVE
The LS is being deactivated.
PENDING_ACTIVE_BY_LR
The LS has failed (or an attempt to activate it has failed) and SNAplus2 is attempting to reactivate it.
sub_state
This parameter provides more detailed information about the state of this link station. Possible values are:
SENT_CONNECT_OUT
The local node has requested that initial contact be established.
PENDING_XID_EXCHANGE
417
