Administration Commands
query_statistics
last_fail_frmr_info
If the last LS failure was caused by an FRMR frame that was not valid, this parameter contains the information from the FRMR frame. If the LS has not failed or if the failure was not caused by a frame that was not valid, this parameter is set to zeros.
last_fail_replyto_s
The number of times that the reply timeout expired before the last failure. If the LS has not failed, this parameter is set to 0.
g_poll
The group poll address for the LS. If the LS is not in a group, this parameter is set to 0.
sim_rim
Specifies whether the LS supports transmission of SIM and RIM control frames. Possible values are:
YES
LS supports SIM and RIM.
NO
LS does not support SIM and RIM.
xmit_rcv_cap
Specifies the transmit / receive capability of the LS. Possible values are:
HALF
FULL
2.170.4 Returned Parameters: SDLC Port Statistics
Parameter name | Type |
index | decimal |
dwarf_frames | decimal |
polls_out | decimal |
poll_rsps_out | decimal |
local_busies | decimal |
remote_busies | decimal |
iframes_in | decimal |
iframes_out | decimal |
octets_in | decimal |
octets_out | decimal |
protocol_errs | decimal |
activity_to_s | decimal |
rnrlimit_s | decimal |
retries_exps | decimal |
retransmits_in | decimal |
retransmits_out | decimal |
If the command executes successfully, the following parameters are returned:
index
The index value used internally by SNAplus2 to identify the port.
dwarf_frames
The number of frames received by the port that were too short to be valid.
545