243 | HP UX Internet and Networking Software specs

Administration Commands

deﬁne_tr_port, deﬁne_ethernet_port, deﬁne_fddi_port

act_xid_exchange_limit

Activation XID exchange limit. Specify a value in the range 0–65,535.

nonact_xid_exchange_limit

Nonactivation XID exchange limit. Specify a value in the range 0–65,535.

ls_xmit_rcv_cap

Speciﬁes the link station transmit/receive capability. Possible values are:

LS_TWS

Two-way simultaneous

LS_TWA

Two-way alternating

max_ifrm_rcvd

Maximum number of I-frames that can be received by the local link stations before an acknowledgment is sent. Specify in the range 1–127.

target_pacing_count

Indicates the desired pacing window size. Specify a value in the range 1–32,767.

max_send_btu_size

Maximum BTU size that can be sent from this port. This value is used to negotiate the maximum BTU size that a pair of link stations can use to communicate with each other. The value includes the length of the TH and RH (total 9 bytes), as well as the RU. Specify a value in the range 265–65535.

lsap_address

Local SAP address of the port. Specify a multiple of 0x04 in the range 0x04–0xEC. The value must be speciﬁed as two hexadecimal digits preceded by 0x.

implicit_cp_cp_sess_support

Speciﬁes whether CP-CP sessions are allowed for implicit link stations using this port. Possible values are:

YES

CP-CP sessions are allowed for implicit link stations.

NO

CP-CP sessions are not allowed for implicit link stations.

implicit_limited_resource

Speciﬁes whether implicit link stations off this port should be deﬁned as limited resources. Possible values are:

NO

Implicit links are not limited resources, and are not automatically deactivated.

NO_SESSIONS

Implicit links are limited resources, and are automatically deactivated when no active sessions are using them.

INACTIVITY

Implicit links are limited resources, and are automatically deactivated when no active sessions are using them or when no data has ﬂowed for the time period speciﬁed by the implicit_deact_timer parameter.

243

Image 243

HP UX Internet and Networking Software manual 243

Contents

HP-UX SNAplus2 R7 Administration Command Reference Contents Supplied Parameters Supplied Parameters Returned Parameters Error Return Codes 120 133 199 251 258 273 288 312 330 358 393 434 468 516 550 571 593 Appendix a Common Return Codes from snapadmin Commands Appendix C Trademark Notices WarrantyGovernment License Copyright Notices New and Changed Information in This Edition Publishing History Typographic Conventions Prerequisite KnowledgeAbout This Book Organization of This Book HP-UX SNAplus2 3270 User’s Guide SNAplus2 PublicationsPublications for Users HP-UX SNAplus2 General Information Publications for Programmers Publications for Administrators HP-UX SNAplus2 MS Programmer’s Guide Related PublicationsHP-UX SNAplus2 LUA Programmer’s Guide HP-UX SNAplus2 CSV Programmer’s Guide Introduction to SNAplus2 Administration Commands Command Line Options Using snapadmin Changing Speciﬁc Parameters Using Command Line Help Parameter Syntax Used for Administration Commands Default Parameter Values Subrecords in Administration Commands Listinclusive NumentriesListoptions Firstinlist Defineethernetdlc, dlcname = DLCNAME, initiallyactive = YES Examples of Administration Commands Supplied Parameters Activatesession Returned Parameters Error Return Codes State Check Addbackup Adddlctrace Backupname Resourcename Resourcetype Messagetype SidhSidl Odai Aping Userid TpnameSecurity Pwd Iterations DlenConsec Echo Avgtime MaxtimePartnerverdata Sensedata Setnegotiable Changesessionlimit Autoact PlumodesessionlimitMinconwinnerssource Minconwinnerstarget Modename parameter did not match any deﬁned mode name Deactivateconvgroup Deactnormal DeactcleanupConvgroupid Type Deactivatelu0to3 Deactivatesession Plualias Rtmoverﬂow Deﬁne3270diag Description RtmtimeroptionRtmunbind Rtmthresh1 through rtmthresh4 Parameter1 through parameter3 10 deﬁneadjacentlennode Wildcardlus Cpname 11 deﬁnecn Bytecost FqcnnameEffectcap Connectcost Propdelay Userdefparm1 through userdefparm3Portname Function Not Supported 12 deﬁnecos Transmissionpriority Cosname Minbytecost MinpropdelayMineffectcap Minconnectcost Maxconnectcost MaxpropdelayMinuserdefparm1 through minuserdefparm3 Maxeffectcap Minstatus WeightMaxuserdefparm1 through maxuserdefparm3 Minrar Weight associated with this node row Tpnametype 13 deﬁnecpicsideinfoSymdestname Partnerluname Programstrong SecuritypasswordConversationsecuritytype Program Puname 14 deﬁnedefaultpu Implicitpluforbidden 15 deﬁnedefaults Limitedtimeout 16 deﬁnedirectoryentrySpeciﬁcsecuritycodes Wildcardluresource EncpresourceNncpresource Luresource Parenttype 17 deﬁnedlurdefaults Invaliddlusname 18 deﬁnedomainconﬁgﬁle 19 deﬁnedownstreamluComment Nauaddress AllowtimeoutDelayedlogon Dsluname Supplied NAU address was not in the valid range 20 deﬁnedownstreamlurange Dslubasename MinnauMaxnau Returned Parameters 21 deﬁnedsputemplate Hostlu TemplatenameModifytemplate Maxinstance Name speciﬁed for the templatename parameter was not valid Normal 22 deﬁneemulatoruser Viewrtm UsernameStyleﬁle Maxactsessions Userisgroup AlertpermissionChangelu Changestyle Sessionname SessiontypeModeloverride Locallualias 5250DISPLAY5250PRINTER 26 deﬁnefddidlc 23 deﬁneethernetdlc24 deﬁneethernetls 25 deﬁneethernetport 29 deﬁnefocalpoint 28 deﬁnefddiport Application is the main focal point 30 deﬁneinternalpu Puid InitiallyactiveDddluofﬂinesupported Puname parameter contained a character that was not valid 31 deﬁneipdlc Ipprecedencehigh UdpportlowIpprecedencellc Ipprecedencenetwork Learnnode 32 deﬁneipls Lsname AdjcpnameAdjcptype Limitedresource LsapaddressAutoactsupp Tgnumber Lsattributes DisableremoteactLinkdeacttimer Defaultnnserver Cpcpsesssupport UsedefaulttgcharsAdjnodeid Localnodeid Bytecost Maxsendbtusize ReacttimerReacttimerretry Targetpacingcount Adjbrnncpsupport IpacktimeoutMaxifrmrcvd Branchlinktype Livenesstimeout ShortholdmodeRemoteiphost Limitedresource parameter was not set to a valid value 33 deﬁneipport Outlinkactlim MaxrcvbtusizeTotlinkactlim Inblinkactlim Implicitcpcpsesssupport ActxidexchangelimitNonactxidexchangelimit Remotehostname Effectcap through userdefparm3 ImplicitdeacttimerIpacktimeout through shortholdmode Implicituplinktoen Localipinterface Incoming Calls 34 deﬁnelocallu Lusessionlimit DefaultpoolListname Syncptsupport Sscpid DisableTimeout Luattributes Disable parameter was not set to a valid value Fqpartnerlu 35 deﬁnelsrouting Wildcardfqplu 36 deﬁnelu0to3 Poolname PriorityLumodel Sendtermself UsenodedefaultTermmethod Sendunbind 37 deﬁnelu0to3range Basename Priority Basenumber NameattributesUsebasenumber Usehexinname Basename parameter contained a character that was not valid 38 deﬁnelulupassword PasswordVeriﬁcationprotocol 39 deﬁnelupool Luname parameters can be speciﬁed Supplied parameters are Partnerlutimeout 40 deﬁnelu62timeoutGlobaltimeout Locallutimeout 41 deﬁnemode Defaultrusize MaxrusizeuppReceivepacingwin Maxrusizelow MaxnegsesslimMinconwinsrc Minconlosersrc Maxreceivepacingwin 42 deﬁnenode Cpalias NodenameNodetype Fqcpname Maxlocates LocatetimeoutMdssupported Nodeid Treecacheuselimit MdssendalertqsizeCoscachesize Treecachesize Costableversion StoreendptrscvsStoreisrrscvs Storedlurrscvs Dlursupport DisablebranchawarenessCplusyncptsupport Cpluattributes Maxcompressionlevel PuconcsupportNnrar Maxlsexceptionevents Allowbbrqe ImmediatediscontactImmediaterecontact Suppressreqdiscont Nodename parameter contained a character that was not valid 43 deﬁnepartnerlu Parallelsesssupp PluunnameMaxmcllsendsize Convsecurityver Cardtype 44 deﬁneqllcdlc 45 deﬁneqllcls Useportdefaults Administration Commands deﬁneqllcls Address Solicitsscpsessions Dspuservices PuconcentrationDlur Hprsupported Adjnodeid Connectcost Userdefparm1 through userdefparm3 Lsneg LsroleLspri Lssec Locpacket VctypeSVC PVC Fac ReqrevchargeLocwsize Remwsize Snid RetrytimeoutIdletimeout Pvcid Invaliddspuname Solicitsscpsess parameter was not set to a valid value PU speciﬁed in the puname parameter has already been deﬁned Lsneg 46 deﬁneqllcport Implicitdsputemplate Portnumber Lsxmitrcvcap Implicitdspuservices Lstwa Lstws Addmode ImplicithprsupportCudmode Cudmatch Addlen Vctype through idletimeout Lsrole parameter was not set to a valid value 47 deﬁnercfaccess UcfusernameSpcfpermissions 48 deﬁnerjewkstn AllowdefineremoteAllowactionremote Systemname WorkstationnamePrimaryuser Groupname 49 deﬁnertptuning Pathswitchtimehigh PathswitchattemptsPathswitchtimelow Pathswitchtimemedium Neglssupp 50 deﬁnesdlcdlc Numports AdapternumberMucredit Statssupport 51 deﬁnesdlcls Administration Commands deﬁnesdlcls Description Address Limitedresource Dspuservices Hprsupported Adjnodeid Bytecost Targetpacingcount Contacttimerretry2 ContacttimerContacttimerretry Contacttimer2 Nvepolltimerretry2 NvepolltimerNvepolltimerretry Nvepolltimer2 Hmoddata PolloniframeOpt1 Linesp Maxifrmrcvd Returned Parameters 196 State Check Escape Sequences for Modem Control Characters Modem Control Characters 52 deﬁnesdlcport Administration Commands deﬁnesdlcport Portswitched PortnonswitchedPorttype Actxidexchangelimit Implicit links to an End Node are uplinks Nprcvtimerretry IdletimerIdletimerretry Nprcvtimer Secfdplx LinkconntimerLinkconntimerretry Prifdplx Maxretrycount Maxxidsize Opt2 Contacttimer through polloniframe RcvpoolsizePollwait Porttype parameter was not set to a valid value 53 deﬁnesecurityaccesslist 54 deﬁnetn3270access Clientaddress Defaultrecord Printerluname AddressformatTn3270support Allowspeciﬁclu 214 55 deﬁnetn3270association Using the Telnet Daemon’s TCP/IP Port Displayluname 56 deﬁnetn3270defaults Keepaliveinterval ForceresponsesKeepalivemethod NOP 57 deﬁnetp Synclevel EnabledConvtype Securityrqd Tpinstancelimit Path 58 deﬁnetploadinfo Stdout ArgumentsGroup Stdin 59 deﬁnetrdlc, deﬁneethernetdlc, deﬁnefddidlc DIX Lantype 60 deﬁnetrls, deﬁneethernetls, deﬁnefddils 226 227 Macaddress 229 230 Hprlinklvlerror 232 233 234 235 Testretrylimit TesttimeoutXidtimeout T1timeout 237 238 Bit Ordering in MAC Addresses Reversing the Bit Order in a MAC Address 61 deﬁnetrport, deﬁneethernetport, deﬁnefddiport 241 242 243 Implicitlinklvlerror Testtimeout through t1retrylimit 246 Addprofiles 62 deﬁneuseridpasswordDeﬁnetype Adduser Deleteadjacentlennode 249 Deletebackup Deletecn Deletecos Deletecpicsideinfo Deletedirectoryentry 255 Deletedlc Deletedownstreamlu Deletedownstreamlurange 259 Deletedsputemplate 260 Deleteemulatoruser Allsessions Deleteoptions3270SESSION 5250SESSION Implicit BackupDeletefocalpoint Active Deleteinternalpu Deletelocallu Deletels Deletelsrouting 268 Deletelu0to3 Deletelu0to3range 271 Deletelulupassword Deletelupool Deletelu62timeout 275 Deletemode Deletepartnerlu Deleteport Deletercfaccess Deleterjewkstn Deletesecurityaccesslist Deletetn3270access 283 Deletetn3270association Deletetp Deletetploadinfo Removeprofiles DeleteuseridpasswordDeletetype Removeuser Initnode 289 Initializesessionlimit 290 291 292 Rtpconnectionname Pathswitch Query3270diag Path Switch Failure Rtmoverﬂow through numalerts Alertnumber Query3270user Scope Returned Parameters Summary Information Returned Parameters Detailed InformationUserpid Query3270usersessions 300 301 Queryactivetransaction Fqorigincpname FqreqloccpnameReqagentapplname Seqnumdt 304 Adjnncpname Queryadjacentnn Lastfrsnrcvd CpcpsessstatusOutofseqtdus Lastfrsnsent Queryavailabletp 308 Traceﬂags Querybckcstrace Querybufferavailability Resetmaxvalues Bufrsrvcount BufavailBuftotalcount Buftotalbytes Querycentrallogger Querycentrallogging Querycn Numactports 316 Querycnport Tgnum 319 Queryconversation Convid Administration Commands queryconversation Sessid LocaltpnamePartnertpname Tpid Querycos Numoftgrows Numofnoderows Rejs QuerycosnoderowTrees Calcs Noderowindex Minrar through weight Querycostgrow Tgrowindex 328 329 Querycpicsideinfo Partnerluname through lualias Destsys Querycstrace Tracedirection Querydefaultpu DefpunameDefpusess Querydefaults Speciﬁcsecuritysensecodes Querydirectoryentry 337 338 Realowningcpname Realowningcptype Entrytype Administration Commands querydirectoryentry Location SuppliercptypeSuppliercpname Querydirectorylu 343 Servername LuownernameWildcard Apparentluownername Querydirectorystats Curregentries MaxcachesCurcaches Curhomeentries Querydlc State Dlctype 350 Querydlctrace Alldlctraces Listtype 353 354 355 Querydlurdefaults Querydlurlu ﬁlter InternalDownstream Lulocation PlunameRscvlen Querydlurpu 361 Deﬁneddlusname Pustatus PulocationActivedlusname Anssupport Pcid Querydlus Isdefault Reqactpusent IsbackupdefaultPipestate Numactivepus Dactlurspsent ActlureceivedActlurspsent Dactlureceived Majorversion through updaterelease QuerydomainconﬁgﬁleRevisionlevel Querydownstreamlu 371 Plusessactive Lusscpsessactive 373 Cursendpacwin RcvrusizeSendrusize Maxsendpacwin Pacingtype RcvdataframesRcvfmddataframes Rcvdatabytes 376 Querydownstreampu Pusscpsessactive 379 380 Querydsputemplate Numofdslutemplates Activeinstance Queryemulatoruserdef ALL Emulatortype Numsessions 386 Queryfocalpoint 388 Implicitfpfqcpname BkupapplnameBkupfpfqcpname Implicitapplname Querygloballogtype Succinctaudits SuccincterrorsAudit Exception Queryisrsession Isrsessions Dlursessions 394 Sendfmddatabytes RscvSendrpc Rcvrpc Rcvfmddatabytes Resetmaxused QuerykernelmemorylimitLimit Querylocallu ActualMaxused Listbyalias 400 Applconnactive Syncptsupport through backlevel Activesscpid Querylocaltopology Dest DesttypeVRN 405 Cpcpsessionactive DlcdataRsn Status Branchtg ﬁlename BackupﬁlenameQuerylogﬁle Logﬁletype Override Querylogtype 410 Queryls 412 Actsesscount DetadjcpnameDetadjcptype 414 415 416 Substate Dynamic Inxidframes MigrationInxidbytes Inmsgbytes Stoptime DeterminedhprlinklvlerrorBadxids Starttime Lstype DetbranchlinktypeAdjcpisbrnn Reverseanrlabel ActiveisrcountActivelusesscount Activesscpsesscount 423 424 425 426 427 428 Determinedipaddress Querylsrouting 431 Querylu0to3 Hostattachment DirectattachedDlurattached 434 Returned Parameters for All Application Types 436 437 Bindlutype Additional Returned Parameters for an LU Used by Usertype Apptype Puconcdownstreamlu Returned Parameters for an LU Used by an RJE Workstation Cfgaddress CfgdefaultUseripaddress Cbnumber Requestluname Querylulupassword 444 Protocolinuse Protocoldeﬁned Querylupool Numavaillus Numactivelus 448 Querylu62timeout 450 451 Application Querymdsapplication Maxrcvsize Querymdsstatistics Mdsmusrcvdlocal AlerterrorsrcvdUncorrelatedalerterrors Alertssent Faileddeliveries ParseerrorsUnveriﬁederrors Querymode 456 Sesslimit Activesessions Drainsource Maxnegsesslimit DrainpartnerActcwcount Actclcount Implicit Querymodedeﬁnition Maxrusizeupp through maxreceivepacingwin Querymodetocosmapping Querynmvtapplication Msvectorkeytype Conversionrequired Querynntopologynode 467 Frsn To Obtain Consistent Information Using the frsn Parameter Daysleft RarFunctionsupport Branchaware Querynntopologystats Maxnodes NodestateupdatesNodeerrors Nodetimerupdates Nodepurges TgstateupdatesTgerrors Tgtimerupdates Querynntopologytg Ownertype Owner 476 477 478 Subareanumber TgtypeIntersubnettg 480 481 Querynode 482 483 484 Hprsupport Limittpsecurity ERPBIS Setsearchstatus Nnfunctionssupported Forcestandardarb Nnrsn EnfunctionssupportedNnstatus Nnfrsn Currentisrsessions DynlsbadxidsDlurreleaselevel Fqnnservername Querynodeall Conﬁgrole Maxlu62tps Querynodelimits Maxtn3270connections MaxluatpsMaxfmapitps Maxlinkstations Networknode Peaktn3270connectionsPeakdatasessions Branchnetworknode Tnserversupport BacklevelclientSslsupport Querypartnerlu 497 Partnerlulocated Partnercpname Convsecurity Securitydetails DuplexsupportPreference Querypartnerludeﬁnition 502 503 Queryport Portstate 506 507 Portsimrim Abmlssupp Numimplicitlinks Querypu LsapVersion 511 512 513 Tcpcvsupported Dddlusupported Queryrcfaccess Queryrjewkstn 517 Wkstngname WkstnpidWkstnuid Wkstngid Queryrjewkstndef Description through luname Queryrtpconnection Numsessactive Rtpnameﬁrsthoplsname Destnodename 523 Localtcid LivenesstimerArbmode Maxbtusize Packetsreceived ShortreqtimerBytesdiscarded Packetssent Dcsresetcountnonheal ShortreqtimeoutsLivenesstimeouts Delaychangesum Route Queryrtptuning Querysecurityaccesslist Querysecurityaccesslist 529 Numusers Querysession 531 532 Transpri Contention 535 Sessionstarttime Sessiontimeout Querysnanet Domainname Querystatistics Tabletype ResetstatsName Statstype Returned Parameters Sdlc LS Statistics Octetsin IndexBlusin Blusout Xidsin IoctetsoutUiframesin Uiframesout Returned Parameters Sdlc LS Operational Information Maxout MaxdataReplyto Maxin Returned Parameters Sdlc Port Statistics Rnrlimits Returned Parameters Sdlc Port Operational InformationProtocolerrs Activitytos Pause SlowpolltimerTopology Activto Lsstbytesreceived LsstmussentLsstmusreceived Lsstbytessent Arifcierror LineerrorInternalerror Bursterror Returned Parameters Enterprise Extender Querytn3270accessdef 552 553 554 Querytn3270association 556 Querytn3270defaults Querytnservertrace 559 Querytp 560 Locallystartedcount QuerytpdeﬁnitionInstancelimit Instancecount 562 Listname through tpinstancelimit Querytploadinfo 565 Traceﬁletype Querytraceﬁle Dualﬁles Traceﬁlesizeﬁlename2 Querytracetype Truncationlength Queryuseridpassword Removedlctrace 572 573 Resetsessionlimit ONE Modenameselect Force Draintarget 577 578 Initﬂags Setbckcstrace Setﬂags Setcentrallogging Setbufferavailability Setcstrace Csadminmsg CsdatagramCsdata Cssend CsreceiveCsboth Leaveunchanged Setgloballogtype 586 Setkernelmemorylimit Action Setlogﬁle Backupfile NofileactionDeletefile Setlogtype 591 592 NOF SettnservertraceFmapi CFG Settraceﬁle 595 Settracetype Sdlc AppcLUA Dlpi Dgrm Startdlc Startinternalpu 601 Startls Enable Remoteact Autoact Unsuccessful Startport 605 Returned Information Statusall 607 Statusconnectivity Lutype Statusdependentlu Other DisplayRJE LU6 Snapadmin statusdependentlu,puname=ETH0 LU62 Statusdlur Example 2-6 Returned Information for the statusdlur Command Statuslu62 Example 2-7 Returned Information for the statuslu62 Command Statusnode Example 2-8 Returned Information for the statusnode Command Parameters Statusremotenode Immediatestop StopdlcStoptype Orderlystop Stopinternalpu 619 Stopls 621 Stopport Termnode Quiesce DeactcleanAbort Shutdown Function Not Supported Communications Subsystem Not Active State Check Parameter Check System Error Conﬁguration File Format Initial Conﬁguration Files Record Format Record Ordering in a Conﬁguration File Subrecord Format Sample snapadmin Input Files File Input to the snapadmin Program Sample Files Delivered with SNAplus2 Config1.cfg Path Environment Variables That Affect All FunctionsEnvironment Variables That Affect 3270 Emulation Lang SNAP3270SI and SNAP3270SO SNAP3270LOWERRIGHT SNAP3270COLOR Environment Variables That Affect RJE Workstations Appcllu Environment Variables That Affect the CSV API Columns Environment Variables That Affect Tracing Snatrunc 639 Index 640 641 642 643 644 645 646 647 648 649 650 651