Administration Commands
query_lu62_timeout
Maximum number of entries for which data should be returned. You can specify 1 to return data for a specific entry, a number greater than 1 to return data for multiple entries, or 0 (zero) to return data for all entries.
list_options
The position in the list of entries from which SNAplus2 begins to return data. The list is ordered by resource_type in the order GLOBAL_TIMEOUT, LOCAL_LU_TIMEOUT, PARTNER_LU_TIMEOUT, MODE_TIMEOUT, then by resource_name in order of the name length, then by lexicographical ordering for names of the same length.
Possible values are:
FIRST_IN_LIST
Start at the first entry in the list
LIST_INCLUSIVE
Start at the entry specified by the combination of the resource_type and resource_name parameters
LIST_FROM_NEXT
Start at the entry immediately following the entry specified by the combination of the resource_type and resource_name parameters
resource_type
Specifies the type of timeout being queried. This parameter is ignored if list_options is set to FIRST_IN_LIST.
Possible values are:
GLOBAL_TIMEOUT
Timeout applies to all LU 6.2 sessions for the local node.
LOCAL_LU_TIMEOUT
Timeout applies to all LU 6.2 sessions for the local LU specified in the resource_name parameter.
PARTNER_LU_TIMEOUT
Timeout applies to all LU 6.2 sessions to the partner LU specified in the resource_name parameter.
MODE_TIMEOUT
Timeout applies to all LU 6.2 sessions using the mode specified in the resource_name parameter.
resource_name
Name of the resource being queried. This value can be one of the following:
•If resource_type is set to GLOBAL_TIMEOUT, do not specify this parameter.
•If resource_type is set to LOCAL_LU_TIMEOUT, specify
•If resource_type is set to PARTNER_LU_TIMEOUT, specify the fully qualified name of the partner LU as follows:
•If resource_type is set to MODE_TIMEOUT, specify
This parameter is ignored if list_options is set to FIRST_IN_LIST.
2.145.2 Returned Parameters
Parameter name | Type | Length |
resource_typeconstant
