HP UX Internet and Networking Software manual Numentries, Numactports

Administration Commands

query_cn

2.108.1 Supplied Parameters

Parameter name	Type	Length	Default
[query_cn]
num_entries	decimal		1
list_options	constant		LIST_INCLUSIVE
fqcn_name	character	17	(null string)

Supplied parameters are:

num_entries

Maximum number of CNs for which data should be returned. You can specify 1 to return data for a specific CN, a number greater than 1 to return data for multiple CNs, or 0 (zero) to return data for all CNs.

list_options

The position in the list of CNs from which SNAplus2 begins to return data.

Possible values are:

FIRST_IN_LIST

Start at the first entry in the list

LIST_INCLUSIVE

Start at the entry specified by the fqcn_name parameter

LIST_FROM_NEXT

Start at the entry immediately following the entry specified by the fqcn_name parameter

fqcn_name

Fully qualified name of the CN for which information is required, or the name to be used as an index into the list of CNs. This value is ignored if list_options is set to FIRST_IN_LIST. Specify 3–17 type-A characters consisting of a 1–8 character network name, followed by a period, followed by a 1–8 character CN name.

2.108.2 Returned Parameters

Parameter name	Type	Length
fqcn_name	character	17
num_act_ports	decimal
description	character	31
num_ports	decimal
effect_cap	decimal
connect_cost	decimal
byte_cost	decimal
security	constant
prop_delay	constant
user_def_parm_1	decimal
user_def_parm_2	decimal
user_def_parm_3	decimal

If the command executes successfully, the following parameters are returned:

fqcn_name

Fully qualified name of the CN.

num_act_ports

The number of active ports on the connection network.

description

315