Administration Commands
query_pu
list_options | constant |
| LIST_INCLUSIVE |
pu_name | character | 8 | (null string) |
host_attachment | constant |
| NONE |
Supplied parameters are:
num_entries
Maximum number of PUs for which data should be returned. You can specify 1 to return data for a specific PU, a number greater than 1 to return data for multiple PUs, or 0 (zero) to return data for all PUs.
list_options
The position in the list of PUs from which SNAplus2 begins to return data.
Specify one of the following values:
FIRST_IN_LIST
Start at the first entry in the list
LIST_INCLUSIVE
Start at the entry specified by the pu_name parameter
LIST_FROM_NEXT
Start at the entry immediately following the entry specified by the pu_name parameter
pu_name
Name of the PU for which information is required, or the name to be used as an index into the list of PUs. This value is ignored if list_options is set to FIRST_IN_LIST. This name is a
host_attachment
Specifies whether to filter the returned information by whether the PUs are attached to the host directly or using DLUR. Possible values are:
DIRECT_ATTACHED
Return information only about PUs directly attached to the host system.
DLUR_ATTACHED
Return information only about PUs supported by DLUR.
NONE
Return information about all PUs regardless of host attachment.
2.161.2 Returned Parameters
Parameter name | Type | Length |
pu_name | character | 8 |
description | character | 31 |
ls_name | character | 8 |
pu_sscp_sess_active | constant |
|
host_attachment | constant |
|
rcv_ru_size | decimal |
|
send_ru_size | decimal |
|
max_send_btu_size | decimal |
|
max_rcv_btu_size | decimal |
|
max_send_pac_win | decimal |
|
cur_send_pac_win | decimal |
|
