![](/images/new-backgrounds/1308428/308428531x1.webp)
Administration Commands
delete_ls
2.76.1 Supplied Parameters
Parameter name | Type | Length |
[delete_local_lu] |
|
|
lu_name | character | 8 |
Supplied parameter is:
lu_name
Name of the local LU to be deleted. This name is a
2.76.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.76.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
CANT_DELETE_CP_LU
The LU name associated with the CP was supplied; this LU cannot be deleted.
INVALID_LU_NAME
The supplied LU name is not the name of a local LU defined on the SNAplus2 system.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.
2.77 delete_ls
The delete_ls command deletes a defined link station (LS). This command also deletes the PU associated with the LS, all LUs owned by this PU, and all
2.77.1 Supplied Parameters
Parameter name | Type | Length |
[delete_ls]
266