HP UX Internet and Networking Software manual 425

Administration Commands

query_ls

NO

Use effect_cap through user_def_parm_3 parameters returned on this command.

ls_attributes

Attributes of the remote system with which SNAplus2 is communicating.

This parameter is usually set to SNA, unless you are communicating with a host of one of the other types listed below. Possible values are:

SNA

Standard SNA host.

FNA

Fujitsu Network Architecture (VTAM-F) host.

HNA

Hitachi Network Architecture host.

SUPPRESS_CP_NAME

Suppress the CP name associated with the remote node.

If this LS is to a back-level LEN node that cannot accept the Network Name CV in the format 3 XID it receives, a + character is used to combine the value SNA, FNA, or HNA with SUPPRESS_CP_NAME (for example, SNA+SUPPRESS_CP_NAME). If the LS is to any other node type, or to a back-level node that can accept the Network Name CV, the option SUPPRESS_CP_NAME is not used.

adj_node_id

Node ID of adjacent node. This ID is a 4-byte hexadecimal string; a value of 4 zeros indicates that node ID checking is disabled.

local_node_id

Node ID sent in XIDs on this LS. This ID is a 4-byte hexadecimal string; a value of 4 zeros indicates that SNAplus2 uses the node ID specified in define_node.

cp_cp_sess_support

Specifies whether CP-CP sessions are supported. Possible values are:

YES

CP-CP sessions are supported.

NO

CP-CP sessions are not supported.

effect_cap

A decimal value representing the line speed in bits per second.

connect_cost

Cost per connect time.

byte_cost

Cost per byte.

security

Security level of the network. Possible values are:

SEC_NONSECURE

No security.

SEC_PUBLIC_SWITCHED_NETWORK

425