Appendix ACommon Return Codes from snapadmin Commands
primary_rc
INVALID_VERB
secondary_rc
(This parameter is not used.)
primary_rc
FUNCTION_NOT_SUPPORTED
secondary_rc
(This parameter is not used.)
A.3 Parameter Check
There are no common parameter check return codes. Parameter check return codes that are specific to a particular command are described in the individual command descriptions.
A.4 State Check
If the command does not execute because of a state check, SNAplus2 returns the following parameters:
primary_rc
STATE_CHECK
secondary_rc
Possible values are:
CANT_MODIFY_VISIBILITY
You have attempted to define a resource with a name that is reserved for use internally by SNAplus2. Please choose a different name.
FILE_LOCKED
Another administration program or NOF application has locked the configuration file. Wait for the other application to complete its processing and try again.
FILE_UNAVAILABLE
The connection to the target configuration file has been lost.
INVALID_VERSION
The SNAplus2 version number in the configuration file header does not match the version number of the SNAplus2 software you are using. Check that you have the correct file; if the file was created using an earlier version of SNAplus2, refer to the
NOT_AUTHORIZED
You do not have permission to issue this administration command because your login ID is not a member of the SNA administrators group sna. You can issue query_* or status_* commands to view information about SNAplus2 resources, but you cannot modify, start, or stop resources.
626
