Administration Commands
query_focal_point
description
A text string describing the focal point, as specified in the definition of the focal point.
bkup_appl_name
Backup focal point application name. This name is one of the MS
bkup_fp_fqcp_name
Fully qualified control point name of the backup focal point.
implicit_appl_name
Name of the implicit focal point application, as specified using define_focal_point. This name is one of the MS
implicit_fp_fqcp_name
Fully qualified control point name of the implicit focal point, as specified using define_focal_point.
fp_type
Type of focal point. For more information, refer to Systems Network Architecture: Management Services. Possible values are:
EXPLICIT_PRIMARY_FP
IMPLICIT_PRIMARY_FP
BACKUP_FP
DEFAULT_PRIMARY_FP
DOMAIN_FP
HOST_FP
NO_FP
fp_status
Status of the focal point. Possible values are:
ACTIVE
The focal point is currently active.
NOT_ACTIVE
The focal point is currently not active.
PENDING
The focal point is pending active. This status occurs after an implicit request has been sent to the focal point and before the response has been received.
NEVER_ACTIVE
No focal point information is available for the specified category, although application registrations for the category have been accepted.
fp_routing
Specifies whether applications use default or direct routing to route traffic to the focal point. Possible values are:
DEFAULT
The MDS_MU is delivered to the focal point using default routing.
DIRECT
The MDS_MU is routed on a session directly to the focal point.
appl_name
389
