Administration Commands
query_mode
NO
Waiting session requests are not satisfied before sessions are deactivated
drain_partner
Specifies whether the partner LU satisfies waiting session requests before deactivating a session when session limits are changed or reset. Possible values are:
YES
Waiting session requests are satisfied before sessions are deactivated.
NO
Waiting session requests are not satisfied before sessions are deactivated.
auto_act
Number of contention winner sessions that are automatically activated following the CNOS exchange with the partner LU.
act_cw_count
Number of active contention winner sessions using this mode.
act_cl_count
Number of active contention loser sessions using this mode.
sync_level
Specifies the synchronization level that the mode supports. Possible values are:
CONFIRM
The mode supports synchronization using the CONFIRM and CONFIRMED verbs.
SYNCPT
The mode supports sync point functions.
NONE
The mode does not support synchronization.
default_ru_size
Specifies whether the default upper and lower bounds for the maximum RU size is used. Possible values are:
YES
SNAplus2 ignores the maximum RU size bounds specified in the definition of the mode, and sets the upper bound for the maximum RU size to the default (the largest value that can be accommodated in the link BTU size).
NO
SNAplus2 uses the maximum RU size bounds specified in the definition of the mode.
max_neg_sess_limit
Specifies the maximum negotiable session limit that a local LU can use with this mode name during its CNOS processing as the target LU.
max_rcv_ru_size
Specifies the maximum RU size received.
pending_session_count
Specifies the number of sessions pending (waiting for session activation).
termination_count
459