HP UX Internet and Networking Software manual 532

Administration Commands

query_session

Fully qualified network name of the partner LU. Specify 3–17 type-A characters that consist of a 1–8 character network name, followed by a period, followed by a 1–8 character partner LU name. For the network name and partner LU name, use only letters, digits 0–9, and special characters $, #, and @.

This parameter is used only if the plu_alias parameter is not specified; it is ignored if plu_alias is specified.

mode_name

Mode name. This name is a type-A character string. To return information only about sessions associated with a specific mode, specify the mode name; the partner LU must also be specified (using plu_alias or fqplu_name). To return information about all sessions without filtering on mode name, do not specify this parameter.

session_id

The 8-byte identifier of the session for which information is required, or the session ID to be used as an index into the list of sessions. This parameter is ignored if list_options is set to FIRST_IN_LIST.

2.168.2 Returned Parameters: Summary Information

Parameter name	Type	Length
plu_alias	character	8
fqplu_name	character	17
mode_name	character	8
session_id	hex array	8
pcid	hex array	8
fqcp_name	character	17

If the command executes successfully and you specified SUMMARY as the list_options parameter value, SNAplus2 returns the following parameters:

plu_alias

Partner LU alias.

fqplu_name

A 17-byte fully qualified network name of the partner LU.

mode_name

Mode name.

session_id

An 8-byte identifier of the session.

pcid

Procedure Correlator ID.

fqcp_name

Fully qualified CP name of the node.

2.168.3 Returned Parameters: Detailed Information

Parameter name	Type	Length
plu_alias	character	8
fqplu_name	character	17
mode_name	character	8
session_id	hex array	8
pcid	hex array	8
fqcp_name	character	17

532