Administration Commands
query_port
write_timer_retry | decimal |
link_conn_timer | decimal |
link_conn_timer_retry | decimal |
pri_fdplx | constant |
sec_fdplx | constant |
use_rej | constant |
spec_port_type | constant |
max_xid_size | decimal |
max_retry_count | decimal |
opt1 | constant |
opt2 | constant |
linesp | decimal |
rcv_pool_size | decimal |
poll_wait | decimal |
hmod_data | character |
contact_timer | decimal |
contact_timer_retry | decimal |
contact_timer2 | decimal |
contact_timer_retry2 | decimal |
disc_timer | decimal |
disc_timer_retry | decimal |
nve_poll_timer | decimal |
nve_poll_timer_retry | decimal |
nve_poll_timer2 | decimal |
nve_poll_timer_retry2 | decimal |
no_resp_timer | decimal |
no_resp_timer_retry | decimal |
rem_busy_timer | decimal |
rem_busy_timer_retry | decimal |
rr_timer | decimal |
poll_frame | constant |
poll_on_iframe | constant |
For QLLC, the following parameters are included. For more information about these parameters, see Section 2.46, define_qllc_port.
address | character | 14 |
cud_mode | constant |
|
cud_match | character | 16 |
add_mode | constant |
|
add_len | decimal |
|
vc_type | constant |
|
loc_packet | decimal |
|
rem_packet | decimal |
|
loc_wsize | decimal |
|
rem_wsize | decimal |
|
retry_limit | decimal |
|
retry_timeout | decimal |
|
idle_timeout | decimal |
|
For Token Ring, Ethernet, or FDDI, the following parameters are included. For more information about these parameters, see Section 2.61, define_tr_port, define_ethernet_port, define_fddi_port.
mac_address | hex array |
lsap_address | hex number |
test_timeout | decimal |
test_retry_limit | decimal |
xid_timeout | decimal |
xid_retry_limit | decimal |
t1_timeout | decimal |
t1_retry_limit | decimal |