Administration Commands
status_dependent_lu
12 | LU5 | DISPLAY Active | Model 5 displ | |
|
|
| 3270 display user: liz | |
|
|
| Computer: george | |
13 | DEPLU2 | LU62 | Active | Used by APP2 |
|
|
| Partner LU: APPN.PARTNER | |
|
|
| Mode: MODE1 |
Status about a particular LU type is obtained by specifying the LU type in the command. You can specify any of the following values:
DISPLAY
3270 display LU
PRINTER
3270 printer LU
RJE
RJE workstation
LU62
Dependent LU type 6.2
OTHER
Unrestricted type
For example, SNAplus2 returns the information shown in the following example, if you enter:
snapadmin status_dependent_lu, lu_type=DISPLAY
Example
PU name Lsname NAU LU name LU type Status Description
PU0 | TRL0 |
|
| Inactive | Link to host |
| 3 | LU1 | DISPLAY | Inactive | Freds Display |
PU5 | ETH0 |
|
| SSCP | Link for appl |
| 12 | LU5 | DISPLAY | Active | Model 5 displ |
|
|
|
| 3270 display user: liz | |
|
|
|
| Computer: george |
2.200.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
No parameter errors occur for this command.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
612