HP UX Internet and Networking Software manual Deletelulupassword, Luname

Administration Commands

delete_lu_lu_password

The base_name parameter contained a character that was not valid.

State Check

If the command does not execute because of a state error, SNAplus2 returns the following parameters:

primary_rc

STATE_CHECK

secondary_rc

INVALID_LU_NAME

There were no LUs defined with names in the specified range.

Other Conditions

Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.

2.81 delete_lu_lu_password

The delete_lu_lu_password command deletes an LU-LU password associated with a local LU. LU-LU passwords are deleted automatically when the local LU is deleted; use this command only if you need to delete the password but leave the LU configured.

2.81.1 Supplied Parameters

Parameter name	Type	Length	Default
[delete_lu_lu_password]
lu_name	character	8	(null	string)
lu_alias	character	8	(null	string)
fqplu_name	character	17

Supplied parameters are:

lu_name

LU name of the local LU. This name is a type-A character string. To indicate that the LU is defined by its LU alias instead of its LU name, do not specify this parameter.

lu_alias

LU alias of the local LU. This is a character string using any locally displayable characters. This parameter is used only if lu_name is not specified.

To indicate the LU associated with the CP (the default LU), do not specify either lu_name or lu_alias.

fqplu_name

Fully qualified name of the partner LU. Specify 3–17 type-A characters consisting of a 1–8 character network name, followed by a period, followed by a 1–8 character partner LU name.

2.81.2 Returned Parameters

No parameters are returned by SNAplus2 when this command executes successfully.

272