![](/images/new-backgrounds/1308428/308428353x1.webp)
Administration Commands
define_rtp_tuning
•Jobs can be submitted to the workstation on any computer where the workstation can be run, but jobs will not be sent to the host until the workstation is started on the computer where the jobs are spooled.
•Output returned from the host will be sent to the appropriate file, directory, or program on the computer where the workstation is running when it receives the output; this computer is not necessarily the same computer from which the job was originally submitted.
lu_name
Names of the LUs that this workstation uses. Each name is a string consisting of
If the workstation uses more than one LU, all LUs must be defined at the same host. If the LUs are associated with different local PUs, they will access the host using different link stations.
2.48.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.48.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
INVALID_LU_NAME
The lu_name parameter did not match the name of any defined type
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.
2.49 define_rtp_tuning
The define_rtp_tuning command specifies parameters to be used when setting up RTP connections. After you issue this command, the parameters you specify will be used for all future RTP connections until you modify them by issuing a new define_rtp_tuning command.
2.49.1 Supplied Parameters
Parameter name | Type | Length | Default |
[define_rtp_tuning]
177