Administration Commands
reset_session_limit
Possible values are:
AS_SPECIFIED
The command executed successfully. The session limits were changed as specified.
FORCED
The session limits were set to 0 even though CNOS negotiation failed.
AS_NEGOTIATED
The session limits were changed, but one or more values were negotiated by the partner LU.
2.182.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
EXCEEDS_MAX_ALLOWED
A SNAplus2 internal error occurred.
INVALID_LU_ALIAS
The lu_alias parameter value did not match any defined local LU alias.
INVALID_LU_NAME
The lu_name parameter value did not match any defined local LU name.
INVALID_MODE_NAME
The mode_name parameter value did not match any defined mode name.
INVALID_PLU_NAME
The fqplu_name parameter value did not match any defined partner LU name.
INVALID_MODE_NAME_SELECT
The mode_name_select parameter was not set to a valid value.
INVALID_DRAIN_SOURCE
The drain_source parameter was not set to a valid value.
INVALID_DRAIN_TARGET
The drain_target parameter was not set to a valid value.
INVALID_FORCE
The force parameter was not set to a valid value.
INVALID_RESPONSIBLE
The responsible parameter was not set to a valid value.
INVALID_SET_NEGOTIABLE
The set_negotiable parameter was not set to a valid value.
