HP UX Internet and Networking Software Useripaddress, Cbnumber, Cfgdefault, Cfgaddress, Cfgformat

Administration Commands

query_lu_0_to_3

Type of application using this LU. This parameter is set to TN_SERVER.

user_ip_address

The dotted-decimal IP address of the computer where the TN3270 program is running.

port_number

The TCP/IP port number that the TN3270 program uses to access TN server.

cb_number

TN server control block number.

cfg_default

Specifies whether the TN3270 program is using an explicitly defined TN server user record or is using the configured default record. For more information about configuring a default TN server user record, see Section 2.54, define_tn3270_access. Possible values are:

YES

The program is using the default record. The cfg_address and cfg_format parameters are reserved.

NO

The program is using an explicitly defined record.

cfg_address

The TCP/IP address of the computer on which the TN3270 program runs, as defined in the configuration record that this user is using.

The address may be specified as a dotted-decimal IP address (such as 193.1.11.100), as a name (such as newbox.this.co.uk), or as an alias (such as newbox); the format is indicated by the cfg_format parameter.

cfg_format

Specifies the format of the cfg_address parameter. Possible values are:

IP_ADDRESS

IP address

FULLY_QUALIFIED_NAME

Alias or fully qualified name

tn3270_level

Level of TN3270 support. Possible values are:

LEVEL_TN3270

TN3270E protocols are disabled.

LEVEL_TN3270E

TN3270E protocols are enabled.

lu_select

Method of LU selection. Possible values are:

GENERIC_LU

This LU can be used by any TN3270 program that requests a generic display or printer LU.

SPECIFIC_LU

This LU can be used only by a TN3270 program that names this LU specifically.

ASSOCIATED_LU

442