Administration Commands
define_tr_ls, define_ethernet_ls, define_fddi_ls
APPN node; this parameter, and effect_cap through user_def_parm_3 parameters are ignored otherwise. Possible values are:
YES
Use the default TG characteristics; ignore effect_cap through user_def_parm_3 parameters on this command.
NO
Use effect_cap through user_def_parm_3 parameters on this command.
effect_cap
A decimal value representing the line speed in bits per second.
connect_cost
Cost per connect time. Valid values are integer values in the range
byte_cost
Cost per byte. Valid values are integer values in the range
security
Security level of the network. Possible values are:
SEC_NONSECURE
No security.
SEC_PUBLIC_SWITCHED_NETWORK
Data is transmitted over a public switched network.
SEC_UNDERGROUND_CABLE
Data is transmitted over secure underground cable.
SEC_SECURE_CONDUIT
Data is transmitted over a line in a secure conduit that is not guarded.
SEC_GUARDED_CONDUIT
Data is transmitted over a line in a conduit that is protected against physical tapping.
SEC_ENCRYPTED
Data is encrypted before transmission over the line.
SEC_GUARDED_RADIATION
Data is transmitted over a line that is protected against physical and radiation tapping.
prop_delay
Propagation delay (the time that a signal takes to travel the length of the link). Specify one of the following values, according to the type of link:
PROP_DELAY_MINIMUM
Minimum propagation delay.
PROP_DELAY_LAN
Delay is less than .5 microseconds (typical for a LAN).
