Administration Commands
query_dlur_pu
NONE
Return information about all PUs regardless of location.
For end node, this parameter is reserved (downstream DLUR PUs are not supported).
2.125.2 Returned Parameters: Summary Information
Parameter name | Type | Length |
pu_name | character | 8 |
description | character | 31 |
If the command executes successfully and you specified SUMMARY as the list_options parameter value, SNAplus2 returns the following parameters:
pu_name
Name of the PU.
description
A text string describing the PU, as specified in the definition of the PU. This parameter is reserved if the PU is an active downstream PU, rather than a defined internal PU.
2.125.3 Returned Parameters: Detailed Information
Parameter name | Type | Length |
pu_name | character | 8 |
description | character | 31 |
defined_dlus_name | character | 17 |
bkup_dlus_name | character | 17 |
pu_id | hex array | 4 |
pu_location | constant |
|
active_dlus_name | character | 17 |
ans_support | constant |
|
pu_status | constant |
|
dlus_session_status | constant |
|
pcid | hex array | 8 |
fqcp_name | character | 17 |
initially_active | constant |
|
dlus_retry_timeout |
|
|
dlus_retry_limit |
|
|
If the command executes successfully and you specified DETAIL as the list_options parameter value, SNAplus2 returns the following parameters:
pu_name
Name of the PU.
description
A text string describing the PU, as specified in the definition of the PU. This parameter is reserved if the PU is an active downstream PU, rather than a defined internal PU.
defined_dlus_name
Name of the DLUS node, defined by either the define_internal_pu or define_*_ls command (with dspu_services set to DLUR).
bkup_dlus_name
362
