Administration Commands
remove_dlc_trace
The session ID high byte used in identifying the LFSID for a session on an LS.
sidl
The session ID low byte used in identifying the LFSID for a session on an LS.
odai
The Origin Destination Assignor Indicator used in identifying the LFSID for a session on an LS. Possible values are:
YES
The BIND sender is the node containing the secondary link station.
NO
The BIND sender is the node containing the primary link station.
message_type
The type of messages for which tracing is being removed for the specified resource or session. To remove tracing for all messages, set this parameter to TRACE_ALL. To remove tracing for a specific message, set this parameter to one or more of the following values (combined using a + character):
TRACE_XID
XID messages
TRACE_SC
Session control RUs
TRACE_DFC
Data flow control RUs
TRACE_FMD
Function management data (FMD) messages
TRACE_NLP
Network layer protocol
TRACE_NC
Network connection
TRACE_SEGS
TRACE_CTL
Messages other than MUs and XIDs
For tracing on an RTP connection, the values TRACE_XID, TRACE_NLP, and TRACE_CTL are ignored.
2.181.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.181.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.