
Administration Commands
query_mds_statistics
2.147.1 Supplied Parameters
[query_mds_statistics]
No parameters are supplied for this command.
2.147.2 Returned Parameters
Parameter name | Type |
alerts_sent | decimal |
alert_errors_rcvd | decimal |
uncorrelated_alert_errors | decimal |
mds_mus_rcvd_local | decimal |
mds_mus_rcvd_remote | decimal |
mds_mus_delivered_local | decimal |
mds_mus_delivered_remote | decimal |
parse_errors | decimal |
failed_deliveries | decimal |
ds_searches_performed | decimal |
unverified_errors | decimal |
If the command executes successfully, SNAplus2 returns the following parameters:
alerts_sent
Number of locally originated alerts sent using the MDS transport system.
alert_errors_rcvd
Number of error messages received by MDS. An error message indicates a delivery failure for a message containing an alert.
uncorrelated_alert_errors
Number of error messages received by MDS. An error message indicates a delivery failure for a message containing an alert. Delivery failure occurs when the error message cannot be correlated to an alert on the MDS send alert queue. MDS maintains a
Note
The two counts alert_errors_rcvd and uncorrelated_alert_errors can be used to check that the size of the send alert queue (specified on the define_node command) is appropriate. If the value of uncorrelated_alert_errors increases over time, the size of the send alert queue is too small.
mds_mus_rcvd_local
Number of MDS_MUs received from local applications.
mds_mus_rcvd_remote
Number of MDS_MUs received from remote nodes using the MDS_RECEIVE and MSU_HANDLER transaction programs.
mds_mus_delivered_local
Number of MDS_MUs successfully delivered to local applications.
mds_mus_delivered_remote
454