HP UX Internet and Networking Software manual 232

Administration Commands

define_tr_ls, define_ethernet_ls, define_fddi_ls

NO

This link does not support CP-CP sessions to a network node that can act as the local node’s NN server; the local node cannot automatically activate this link if it needs to contact an NN server.

If the local node is not an end node, this parameter is ignored.

ls_attributes

Attributes of the remote system with which SNAplus2 is communicating.

Specify SNA unless you are communicating with a host of one of the other following types. Possible values are:

SNA

Standard SNA host

FNA

Fujitsu Network Architecture (VTAM-F) host

HNA

Hitachi Network Architecture host

SUPPRESS_CP_NAME

Suppress the CP name associated with the remote node. Use a + character to combine this value with SNA, FNA, or HNA.

If adj_cp_type is set to BACK_LEVEL_LEN_NODE, and the remote LEN node associated with this LS cannot accept the Network Name CV in the format 3 XID it receives, use a + character to combine the value SNA, FNA, or HNA with SUPPRESS_CP_NAME (for example, SNA+SUPPRESS_CP_NAME).

If adj_cp_type is set to any other value, the option SUPPRESS_CP_NAME is ignored.

adj_node_id

Node ID of adjacent node. This ID is a 4-byte hexadecimal string, consisting of a block number (three hexadecimal digits) and a node number (five hexadecimal digits). To disable node ID checking, do not specify this parameter.

local_node_id

Node ID sent in XIDs on this LS. This ID is a 4-byte hexadecimal string, consisting of a block number (three hexadecimal digits) and a node number (five hexadecimal digits). To use the node ID specified in the node_id parameter on the define_node, do not specify this parameter.

cp_cp_sess_support

Specifies whether CP-CP sessions are supported. This parameter is valid only if the adjacent node is an end node or a network node (adj_cp_type is NETWORK_NODE, END_NODE, or LEARN_NODE); it is ignored otherwise. If both the local node and the adjacent node are network nodes, this parameter should be set to YES in order to use APPN functions between these nodes.

Possible values are:

YES

CP-CP sessions are supported. The solicit_sscp_sessions parameter must be set to NO.

NO

CP-CP sessions are not supported. use_default_tg_chars

Specifies whether to use the default TG characteristics supplied on define_tr_port / de- fine_ethernet_port / define_fddi_port . The TG characteristics apply only if the link is to an

232