Administration Commands

query_ls

bad_xids

Total number of unsuccessful XID exchanges that have occurred on this link station since it was started.

start_time

The time, in hundredths of a second, since system startup, that the link station was last activated (when the mode setting commands completed).

stop_time

The time, in hundredths of a second, since system startup, that the link station was last deactivated.

up_time

Total time, in hundredths of a second that this link station has been active since system startup.

current_state_time

Total time, in hundredths of a second that this link station has been in its current state.

deact_cause

The cause of the last deactivation of the link station. Possible values are:

NONE

The link station has never been deactivated.

DEACT_OPER_ORDERLY

The link station was deactivated as a result of an orderly stop (on the stop_ls command) from an operator.

DEACT_OPER_IMMEDIATE

The link station was deactivated as a result of an immediate stop (on the stop_ls command) from an operator.

DEACT_AUTOMATIC

The link station was automatically deactivated because there were no more sessions using the link sta- tion.

DEACT_FAILURE

The link station was deactivated because of a failure.

determined_hpr_support

Level of High Performance Routing (HPR) supported on this transmission group (TG), taking account of the capabilities of the local and adjacent nodes. Possible values are:

NONE

This TG does not support HPR protocols.

BASE

This TG supports base level HPR.

RTP

This TG supports Rapid Transport Protocols (RTP).

anr_label

The HPR automatic network routing (ANR) label allocated to the local link.

determined_hpr_link_lvl_error

Specifies whether link-level error recovery is being used for HPR traffic on the link.

auto_act

420

Page 420
Image 420
HP UX Internet and Networking Software manual Badxids, Starttime, Stoptime, Uptime, Currentstatetime, Deactcause, Anrlabel