Administration Commands
initialize_session_limit
Minimum number of sessions using this mode for which the partner LU is the contention winner. The sum of the min_conwinners_source and min_conwinners_target parameters must not exceed the plu_mode_session_limit parameter. Specify a value in the range
auto_act
Number of contention winner sessions to be automatically activated after the session limits for the
2.96.2 Returned Parameters
If the command executes successfully, the following parameters are returned:
primary_rc
OK
secondary_rc
Possible values are:
AS_NEGOTIATED
The session limits were initialized, but one or more values were negotiated by the partner LU.
AS_SPECIFIED
The session limits were initialized as requested, without being negotiated by the partner LU.
2.96.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
EXCEEDS_MAX_ALLOWED
The plu_mode_session_limit, min_conwinners_source, min_conwinners_target, or auto_act parameter was set to a value outside the valid range.
CANT_CHANGE_TO_ZERO
The plu_mode_session_limit parameter cannot be set to 0 (zero) using this command; use the reset_session_limit command instead.
INVALID_LU_ALIAS
The lu_alias parameter did not match any defined local LU alias.
INVALID_LU_NAME
The lu_name parameter did not match any defined local LU name.
INVALID_MODE_NAME
