HP UX Internet and Networking Software manual 58 definetploadinfo, Path

Administration Commands

define_tp_load_info

SECURITY_LIST_NOT_DEFINED

The security_list_name parameter did not match any defined security list name.

Other Conditions

Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.

2.58 define_tp_load_info

The define_tp_load_info command is used to define or change a TP load information entry..

2.58.1 Supplied Parameters

Parameter name	Type	Length	Default
[define_tp_load_info]
tp_name	character	64
lualias	character	8
description	character	31
path	character	255	(null string)
arguments	character	255	(null string)
type	constant		QUEUED
timeout	decimal		-1
userid	character	64
group	character	64	(null string)
stdin	character	255	/dev/null
stdout	character	255	/dev/null
stderr	character	255	/dev/null
env	character	255	(null string)

(0–64 env entries can be included)

Supplied parameters are:

tp_name

The TP name of the TP load info entry to be defined.

lualias

The LU alias of the TP load info entry to be defined.

Note

This parameter can be used only if the TP is an APPC TP. If the TP is a CPI- C application, do not specify this parameter. CPI-C does not support accepting incoming Attaches from a particular local LU; specifying an LU alias (even a blank LU alias) for a CPI-C application will cause errors in routing the incoming Attach to the TP.

description

Optional text string describing the TP load info.

path

221