Administration Commands
query_adjacent_nn
adj_nncp_name
Fully qualified name of the adjacent NN.
cp_cp_sess_status
Status of the
ACTIVE
The session is active.
CONWINNER_ACTIVE
The session (a contention winner session) is active.
CONLOSER_ACTIVE
The session (a contention loser session) is active.
INACTIVE
The session is inactive.
out_of_seq_tdus
Number of
last_frsn_sent
The last flow reduction sequence number (FRSN) sent to this node.
last_frsn_rcvd
The last flow reduction sequence number received from this node.
2.102.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
INVALID_ADJ_NNCP_NAME
The list_options parameter was set to LIST_INCLUSIVE to list all entries starting from the supplied name, but the adj_nncp_name parameter value was not valid.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
Function Not Supported
If the command does not execute because the node’s configuration does not support it, SNAplus2 returns the following parameters:
primary_rc
FUNCTION_NOT_SUPPORTED
306
