HP UX Internet and Networking Software manual Supplied Parameters, Basename

Administration Commands

define_lu_0_to_3_range

The supplied parameters include a base name for the new LUs and the range of NAU addresses. The new LU names are generated by combining the base name with the NAU addresses (or with a defined base number). For example, a base name of LUNME combined with a NAU range of 11 to 14 would define the LUs as LUNME011, LUNME012, LUNME013, and LUNME014.

2.37.1 Supplied Parameters

Parameter name	Type	Length	Default
[define_lu_0_to_3_range]
base_name	character	6
description	character	31	(null string)
min_nau	decimal		1
max_nau	decimal		1
pool_name	character	8	(null string)
pu_name	character	8
priority	constant		MEDIUM
lu_model	constant		UNKNOWN
sscp_id	decimal		0
timeout	decimal		0
name_attributes	constant		NONE
base_number	decimal		0
term_method	constant

Supplied parameters are:

base_name

Base name for the names of the new LUs. This name is a type-A character string starting with a letter.

•If the name_attributes parameter is set to USE_HEX_IN_NAME, this name may be up to 6 characters long. SNAplus2 generates the LU name for each LU by appending a 2-digit hexadecimal number to this name (starting from a base number specified by the base_number parameter).

•Otherwise, this name may be up to 5 characters long. SNAplus2 generates the LU name for each LU by appending a 3-digit decimal number to this name (taken from the NAU address or from a defined base number, as specified by the name_attributes parameter).

If USE_HEX_IN_NAME is specified for the name_attributes parameter, the base_name parameter can con- tain 6 characters.

description

A text string describing the LUs; the same string is used for each LU in the range. SNAplus2 uses this string for information only. It is stored in the node’s configuration file and returned on the query_lu_0_to_3 command.

min_nau

NAU address of the first LU, in the range 1–255.

max_nau

NAU address of the last LU, in the range 1–255.

pool_name

Name of pool to which these LUs belong. This name is an 8-byte type-A character string. If a pool with the specified name is not already defined, SNAplus2 adds a new pool with this name and assigns the LUs to it.

If the LUs do not belong to a pool, do not specify this parameter.

pu_name

Name of the PU (defined using define_*_ls) that these LUs will use. This name is a type-A character string starting with a letter.

126