Administration Commands
query_statistics
state
The internal value indicating the processing state of the LS software (for use by support personnel).
maxdata
The current maximum protocol data unit (PDU) size, including the transmission header (TH) and request header (RH), allowed for the logical link. For a switched line, this value can be negotiated during XID exchange.
replyto
The current reply timeout, in hundredths of a second. This parameter applies only if the LS role is primary; its value is undefined if the LS role is secondary.
maxin
The maximum number of frames that the LS can receive before it must send an acknowledgment.
maxout
The maximum number of frames that the LS can send before it must wait for an acknowledgment.
modulo
The sequence number modulus for the LS. Possible values are:
EIGHT
A value of 8
ONETWENTYEIGHT
A value of 128
retries_m
The maximum number of frames in a retry sequence (a sequence of frames that the LS retransmits because it has not received a positive acknowledgment for them).
retries_t
The timeout between retransmissions of a retry sequence.
retries_n
The number of times that the LS attempts to retransmit a retry sequence.
rnrlimit
The maximum length of time that the adjacent LS can remain in RNR state before the local LS considers it to be inoperative.
datmode
The communications mode used with the adjacent LS. Possible values are:
HALF
FULL
last_fail_ctrl_in
The control field from the last frame received before the last failure. If the LS has not LS failed, this parameter is set to zeros.
last_fail_ctrl_out
The control field from the last frame sent before the last LS failure. If the LS has not failed, this parameter is set to zeros.
544
