Administration Commands
query_ls_routing
lu_name
Name of the local LU for which routing data is to be returned. This name is an
fq_partner_lu
Fully qualified name of the partner LU for which routing data is to be returned. Specify
If this parameter is set to binary zeros and list_options is set to LIST_FROM_NEXT, the returned list starts at the first partner LU name for the LU identified by the lu_name parameter.
wildcard_fqplu
Wildcard partner LU flag indicating whether the fq_partner_lu parameter contains a full or partial wildcard. This flag is used only to identify the first record to return. It cannot be used to specify that only entries matching the wildcard specification are to be returned. Possible values are:
YES
The fq_partner_lu parameter contains a wildcard entry.
NO
The fq_partner_lu parameter does not contain a wildcard entry.
2.141.2 Returned Parameters
Parameter name | Type | Length |
lu_namecharacter
fq_partner_lu character
wildcard_fqplu character
ls_namecharacter
If the command executes successfully, the following parameters are returned:
lu_name
Name of the local LU.
fq_partner_lu
Fully qualified name of the partner LU.
wildcard_fqplu
Flag indicating whether the fq_partner_lu parameter contains a full or partial wildcard. Possible values are:
YES
The fq_partner_lu parameter contains a full or partial wildcard.
NO
The fq_partner_lu parameter does not contain a full or partial wildcard.
ls_name
Name of the link station used for sessions between the LU specified in the lu_name parameter and the partner LU specified in the fq_plu_name parameter.
2.141.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
