Administration Commands
define_node
2.42.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
INVALID_ISR_THRESHOLDS
The ISR threshold parameters were not valid (lower threshold not less than upper, or upper threshold not less than max_isr_sessions).
INVALID_NODE_NAME
The node_name parameter contained a character that was not valid.
INVALID_CP_NAME
The cp_alias or fqcp_name parameter contained a character that was not valid.
INVALID_NODE_TYPE
The node_type parameter was not set to a valid value.
PU_CONC_NOT_SUPPORTED
This version of SNAplus2 does not support the PU concentration feature.
DLUR_NOT_SUPPORTED
This version of SNAplus2 does not support the DLUR feature.
INVALID_REG_WITH_NN
The reg_with_nn parameter was not set to a valid value.
INVALID_COS_TABLE_VERSION
The cos_table_version parameter was not set to a valid value.
INVALID_SEND_TERM_SELF
The send_term_self parameter was not set to a valid value.
INVALID_DISABLE_BRANCH_AWRN
The disable_branch_awareness parameter was not set to a valid value.
INVALID_DLUR_SUPPORT
The dlur_support parameter was not set to a valid value.
State Check
If the command does not execute because of a state error, SNAplus2 returns the following parameters:
primary_rc
STATE_CHECK
secondary_rc
Possible values are:
NODE_ALREADY_STARTED
146
