![](/images/new-backgrounds/1308428/308428983x1.webp)
Administration Commands
query_node_limits
2.157 query_node_limits
The query_node_limits command returns information about the functions that your SNAplus2 license allows you to use on a particular node, and about your usage of these functions. These are divided into the following categories:
•Node options, which specify the SNAplus2 features that you can use
•Node limits, which specify the maximum numbers of SNAplus2 resources that can be in use on the node at any time.
•Node resource usage, which specifies the current and peak usage of the resources controlled by node limits.
The information returned by this command is also written to the usage log file at intervals. For more information about this file, see
2.157.1 Supplied Parameters
[query_node_limits]
No parameters are supplied for this command.
2.157.2 Returned Parameters
Parameter name | Type |
max_lu62_tps | decimal |
max_lua_tps | decimal |
max_fmapi_tps | decimal |
max_link_stations | decimal |
max_tn3270_connections | decimal |
max_data_sessions | decimal |
current_lu62_tps | decimal |
current_lua_tps | decimal |
current_fmapi_tps | decimal |
current_link_stations | decimal |
current_tn3270_connections | decimal |
current_data_sessions | decimal |
peak_lu62_tps | decimal |
peak_lua_tps | decimal |
peak_fmapi_tps | decimal |
peak_link_stations | decimal |
peak_tn3270_connections | decimal |
peak_data_sessions | decimal |
branch_network_node | constant |
network_node | constant |
end_node | constant |
len_node | constant |
dlur_support | constant |
pu_conc_support | constant |
tn_server_support | constant |
hpr_support | constant |
back_level_client | constant |
ssl_support | constant |
If the command executes successfully, the following parameters are returned:
max_lu62_tps
492