Administration Commands
define_tp
Specifies whether the TP can receive program initialization parameters (PIP). Possible values are:
YES
TP can receive PIP.
NO
TP cannot receive PIP.
tp_instance_limit
Limit on the number of instances of this TP that can be active at any one time. Specify a value in the range
2.57.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.57.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
SYSTEM_TP_CANT_BE_CHANGED
The specified TP name is the name of a TP used internally by SNAplus2; you cannot define or modify a TP with this name.
INVALID_CONV_TYPE
The conv_type parameter was not set to a valid value.
INVALID_SYNC_LEVEL
The sync_level parameter was not set to a valid value.
INVALID_ENABLED
The enabled parameter was not set to a valid value.
INVALID_PIP_ALLOWED
The pip_allowed parameter was not set to a valid value.
State Check
If the command does not execute because of a state error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
220