Qualstar 501440 Rev. G operation manual Initializing the Fibre Channel Option

Small side of “D” connector facing you when oriented correctly for insertion.

Figure 4-11 End View of “D” Connector on GBIC Adapter

16.Prepare to insert the appropriate GBIC (gigabit interface converter) adapter into the FCO. Note that the GBIC adapter is keyed and the small side of the “D” con- nector is facing you when oriented correctly. See Figure 4-11.Locate the rectan- gular opening in the bottom of the Fibre Channel Option and insert the GBIC adapter, “D” connector end first. Then carefully guide the GBIC adapter into the FCO until it clicks into place. Refer to Figure 4-12.

Rectangular opening in bottom	GBIC adapter fully inserted
	into Fibre Channel Option.
of Fibre Channel Option.

Figure 4-12 Inserting GBIC Adapter into Fibre Channel Option

4.4Initializing the Fibre Channel Option

After physically installing the Fibre Channel Option onto the library, disconnect (if connected) the Fibre Channel Option from the FC host or Hub to avoid affecting any operational systems.

NOTE

Refer to the applicable TLS Installation and Operation manual for instructions on using the TLS Library and its menus.

4-10 FCO Type A Installation 501440 Rev. G