Qualstar 501440 Rev. G operation manual Securing the Cables to the TLS

5.5Securing the Cables to the TLS

Two adhesive backed cable tie mounts and Velcro® style cable ties are provided to se- cure the interconnect cables to be secured to the rear of the TLS. Make sure to insert the cable ties into the tie mounts before attaching the mounts to the library. See Figure 5-6for an example of the cables secured to the rear of the TLS.

Fibre Channel Option

Interconnect Cables

Velcro® Cable Ties and

Cable Mounts

Rear of TLS

Figure 5-6 Example of Cables Secured to the Rear of the TLS

5.6Initializing the Fibre Channel Option

After attaching all of the interconnect cables from the Fibre Channel Option to the li- brary, disconnect (if connected) the Fibre Channel Option from the FC host or Hub to avoid affecting any operational systems.

NOTE

Refer to the applicable TLS Installation and Operation manual for instructions on using the TLS Library and its menus.

501440 Rev. G FCO Type B Installation 5-9