8.3.15Air Temp
This value displays the board’s temperature in degrees Celsius.
8.3.16CPU Temp (Type A and B FCOs only)
This value displays the CPU’s temperature in degrees Celsius. This item is not appli- cable to type C FCO models.
8.3.17UPDATE
This menu item is visible when communications to the Fibre Channel Option is in an idle state. Invoking this command will cause the Fibre Channel Option to update the configuration and environmental information.
It takes approximately 35 seconds to obtain new information after the UPDATE com- mand has been invoked.
8.4Maintenance\Fibre Channel\ Log (Left or Right) Status Screen
MFC | ..............Log |
MFC | .........Log Left |
MFC | ........Log Right |
The Fibre Channel Log status screen displays the Fibre Channel Option’s internal event log. The information is provided to assist in troubleshooting problems and is not required for normal library operation. The event log is saved in
The first line in the status screen indicates the Fibre Channel Option selected. The second line contains the event sequence number and a timestamp. Lines three and four contain event text description. If the second line ends with an up arrow, newer events are available for viewing. If the last line ends with a down arrow, older events are available for viewing. These older or newer events can be viewed by using the
V(UP) and W (DOWN) keys to scroll the display. Since the event data is stored in the Fibre Channel Option, a small time delay occurs after each request to retrieve the in- formation for display.
Maintenance Menu | 501440 Rev. G |
