Qualstar 501440 Rev. G operation manual Channel Connections in Type a FCO

CAUTION

SCSI Bus ribbon cables are fragile and can be damaged by pulling on the cable in- stead of the pull-tab provided at each connector.

Steps 5 through 8 only apply to type A Fibre Channel Options.

5.Carefully disconnect the SCSI Bus ribbon cable (labeled CH0) from the CH0 con- nector on the Fibre Channel Option. See Figure 9-3.

CH2 Connector

CH0 Connector CH1 Connector

Figure 9-3 Channel Connections in Type A FCO

6.Carefully disconnect the SCSI Bus ribbon cable (labeled CH1) from the CH1 con- nector on the FCO and then disconnect the last ribbon cable from the CH2 con- nector (if present). See Figure 9-3.

501440 Rev. G Repacking 9-3