Qualstar 501440 Rev. G operation manual Rear View of TLS

with the openings in the FCO. See Figure 6-10.The hinge surfaces should rest flat against the rear of the library.

4.Using a Phillips screwdriver, secure the FCO to the rear of the library at the FCO’s two top captive screws. See Figure 6-10.

5.Using two of the screws that were removed with the service panel, attach the FCO’s two hinges to the rear of the library. See Figure 6-10.

Executive PCBA

Screw Holes (6)

Heatsink Panel

Screws (4)

Captive Screws (4)

Fibre Channel

Option

FCO’s

Hinges (2)

Bottom Edge of

Service Panel Opening

Figure 6-10 Rear View of TLS

6.Loosen the two top captive screws on the FCO that were tightened in step num- ber four. Carefully guide the FCO backwards as it pivots on the hinges and comes to its open position. See Figure 6-11.

6-12 FCO Type C Installation 501440 Rev. G