![](/images/new-backgrounds/1308428/308428517x1.webp)
Administration Commands
delete_dspu_template
2.71.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.71.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
INVALID_NAU_ADDRESS
The min_nau or max_nau parameter value was not valid.
INVALID_LU_NAME
The dslu_base_name parameter contained a character that was not valid.
State Check
If the command does not execute because of a state error, SNAplus2 returns the following parameters:
primary_rc
STATE_CHECK
secondary_rc
Possible values are:
INVALID_LU_NAME
There were no LUs defined with names in the specified range.
DSLU_ACTIVE
One or more of the LUs in the range cannot be deleted because it is currently active.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.
2.72 delete_dspu_template
The delete_dspu_template command deletes a specific DSPU template previously defined on a de- fine_dspu_template command, or deletes one or more downstream LU (DSLU) templates from a DSPU template.
2.72.1 Supplied Parameters
Parameter name | Type | Length | Default |
[delete_dspu_template]