Administration Commands
query_tn3270_access_def
client_address | character | 67 |
address_formatconstant
If the command executes successfully and you specified SUMMARY as the list_options parameter value, SNAplus2 returns the following parameters:
default_record
Specifies whether this entry is the default record. Possible values are:
YES
This entry is the default record. The client_address parameter is not used.
NO
This entry is a TN3270 record for the specified client address.
client_address
The TCP/IP address of the TN3270 client.
address_format
Specifies the format of the client_address parameter. Possible values are:
IP_ADDRESS
IP address
FULLY_QUALIFIED_NAME
Alias or fully qualified name
If you specified SUMMARY as the list_options parameter value, only summary information about TN3270 clients is returned; no information about sessions on those clients is returned. To obtain information about sessions, set the list_options parameter to DETAIL.
2.171.3 Returned Parameters: Detailed Information
If the command executes successfully and you specified DETAIL as the list_options parameter value, SNAplus2 returns a sequence of client entries, identified by the client_address parameter (unless the entry is a default record as identified by the default_record parameter set to YES), with each client entry followed by session entries for that client. Each session entry is identified by the port_number parameter.
The following parameters are returned for each TN3270 client:
Parameter name | Type | Length |
default_record | constant |
|
client_address | character | 67 |
description | character | 31 |
address_format | constant |
|
num_sessions | decimal |
|
The following parameters are returned for each session on the TN3270 client:
description | character | 31 |
port_number | decimal |
|
lu_name | character | 8 |
printer_lu_name | character | 8 |
tn3270_support | constant |
|
allow_specific_lu | constant |
|
The following parameters are returned for each client entry:
