Administration Commands
query_rje_wkstn_def
LIST_INCLUSIVE
Start at the entry specified by the workstation_name parameter
LIST_FROM_NEXT
Start at the entry immediately following the entry specified by the workstation_name parameter
workstation_name
The name of the workstation for which information is required, or the name to be used as an index into the list of workstations. This parameter is ignored if list_options is set to FIRST_IN_LIST.
2.164.2 Returned Parameters: Summary Information
Parameter name | Type | Length |
workstation_name | character | 4 |
If the command executes successfully and you specified SUMMARY as the list_options parameter value, the following parameter is returned:
workstation_name
The name of the workstation.
2.164.3 Returned Parameters: Detailed Information
Parameter name | Type | Length |
workstation_name | character | 4 |
description | character | 32 |
primary_user | character | 32 |
group_name | character | 32 |
system_name | character | 128 |
lu_name | character | 8 |
(Up to five lu_name parameters can be present.)
If the command executes successfully and you specified DETAIL as the list_options parameter value, the following parameters are:
workstation_name
The name of the workstation.
description through lu_name
The details of the workstation, as defined in the configuration. The format of this information is the same as for the define_rje_wkstn command.
2.164.4 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
520