HP UX Internet and Networking Software manual Adapternumber, Mucredit, Statssupport, Numports

Administration Commands

define_sdlc_dlc

Type of adapter card used by the DLC. Possible values are:

HP_PSI

Single-port PSI card

HP_ACC

8-port ACC card

HP_EICON_PCI_SDLC

Eicon PCI SDLC card

adapter_number

Adapter number used by the DLC. If the server contains more than one SDLC adapter card, specify 0 (zero) for the first card, 1 for the second card, and so on. Otherwise, set this parameter to 0 (zero).

initially_active

Specifies whether this DLC is automatically started when the node is started. Possible values are:

YES

The DLC is automatically started when the node is started.

NO

The DLC is automatically started only if a port or LS that uses the DLC is defined as initially active; otherwise, it must be manually started.

mu_credit

Specifies the credit value for sending DLC_MUs to the link component. Set this parameter to 4.

stats_support

Specifies whether the DLC collects link statistics information. Possible values are:

YES

The DLC collects link statistics information, which can be examined using query_statistics.

NO

The DLC does not collect link statistics information.

num_ports

The maximum number of ports that this DLC needs to support at a time.

2.50.2 Returned Parameters

No parameters are returned by SNAplus2 when this command executes successfully.

2.50.3 Error Return Codes

If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.

Parameter Check

If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:

primary_rc

180