![](/images/new-backgrounds/1308428/308428961x1.webp)
Administration Commands
query_node
secondary_rc
(This parameter is not used.)
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.
2.155 query_node
The query_node command returns information about the definition of a SNAplus2 node and also on its status if it is active. This command returns information only about a single node. To obtain a list of nodes in the SNAplus2 domain, use the command query_node_all; you can then use query_node for an individual node in this list to obtain more detailed information.
2.155.1 Supplied Parameters
[query_node]
No parameters are supplied for this command.
2.155.2 Returned Parameters
Parameter name | Type | Length |
description | character | 31 |
node_type | constant |
|
fqcp_name | character | 17 |
cp_alias | character | 8 |
mode_to_cos_map_supp | constant |
|
mds_supported | constant |
|
node_id | character | 4 |
max_locates | decimal |
|
dir_cache_size | decimal |
|
max_dir_entries | decimal |
|
locate_timeout | decimal |
|
reg_with_nn | constant |
|
reg_with_cds | constant |
|
mds_send_alert_q_size | decimal |
|
cos_cache_size | decimal |
|
tree_cache_size | decimal |
|
tree_cache_use_limit | decimal |
|
max_tdm_nodes | decimal |
|
max_tdm_tgs | decimal |
|
max_isr_sessions | decimal |
|
isr_sessions_upper_threshold | decimal |
|
isr_sessions_lower_threshold | decimal |
|
isr_max_ru_size | decimal |
|
isr_rcv_pac_window | decimal |
|
store_endpt_rscvs | constant |
|
store_isr_rscvs | constant |
|
store_dlur_rscvs | constant |
|
dlur_support | constant |
|
pu_conc_support | constant |
|
nn_rar | decimal |
|