Administration Commands
define_dspu_template
define_dspu_template can also be used to define downstream LUs that support applications communicating with a Primary RUI application on the SNAplus2 node. For more information about Primary RUI, see
2.21.1 Supplied Parameters
Parameter name | Type | Length | Default |
[define_dspu_template] |
|
|
|
template_name | character | 8 |
|
description | character | 32 | (null string) |
modify_template | constant |
| REPLACE_DSPU_TEMPLATE |
max_instance | decimal |
| 0 |
{dslu_template} |
|
|
|
min_nau | decimal |
|
|
max_nau | decimal |
|
|
host_lu | character | 8 |
|
allow_timeout | constant |
| NO |
delayed_logon | constant |
| NO |
Supplied parameters are:
template_name
The name of the template for downstream LUs that are present on a group of downstream workstations.
description
Resource description that is returned on the query_dspu_template command.
modify_template
Specifies whether this command should add additional DSLU templates to an existing DSPU template or should replace an existing DSPU template. Possible values are:
MODIFY_DSPU_TEMPLATE
If the named DSPU template does not exist, then it is created. If the named DSPU template does exist, then the DSLU templates supplied to this command are added to the existing DSPU template.
REPLACE_DSPU_TEMPLATE
A new template is created, overwriting any existing definition.
max_instance
The maximum number of instances of the template that can be active concurrently. When the limit is reached, no new instances are created. Specify a value in the range
The subrecord dslu_template contains the following parameters:
min_nau
NAU address of the first downstream PU, in the range
max_nau
NAU address of the last downstream PU, in the range
host_lu
Name of the host LU or host LU pool that the downstream LU uses. This name is an
If the downstream LUs are used to communicate with a SNAplus2 Primary RUI application instead of a host, set this field to the string #PRIRUI#.
86
