Third Edition • Third Printing | Operator's Manual | |
|
|
|
|
|
|
Drive Select Switch
Machine on incline symbol:
Low range operation for inclines
Error Indicator Light On
If the error indicator light is on, push in and pull out the red Emergency Stop button to reset the system.
If the light stays red, tag and remove the machine from service.
To Extend and Retract Platform (Manual Platform Extension)
1Lift the platform extension lock handle to the horizontal position.
2Push the platform extension lock handle to extend the platform to the desired position.
Do not stand on the platform extension while trying to extend it.
3 Lower the platform extension lock handle.
Operation From Ground with Controller
Maintain safe distances between the operator, the machine and fixed objects.
Be aware of the direction the machine will travel when using the controller.
OPERATING INSTRUCTIONS
Fall Protection
Personal fall protection equipment (PFPE) is not required when operating this machine. If PFPE is required by job site or employer rules, the following shall apply:
All PFPE must comply with applicable governmental regulations and must be inspected and used in accordance with the manufacturer’s instructions.
After Each Use
1Select a safe parking
2Lower the platform.
3Turn the key switch to the off position and remove the key to secure from unauthorized use.
4Chock the wheels.
5Charge the batteries.
Part No. 82750 | Genie | 23 |
