Third Edition • Third Printing | Operator's Manual | |
|
|
|
|
|
|
Do not alter or disable the limit switches.
Do not drive over 0.5 mph / 0.8 km/h with the platform raised.
Do not depend on the tilt alarm as a level indicator. The tilt alarm sounds on the chassis and in the platform when the machine is on a severe slope.
If the tilt alarm sounds:
Lower the platform. Move the machine to a firm, level surface. If the tilt alarm sounds when the platform is raised, use extreme caution to lower the platform.
Do not raise the platform unless the machine is on a firm, level surface.
Do not use the platform controls to free a platform that is caught, snagged or otherwise prevented from normal motion by an adjacent structure. All personnel must be removed from the platform before attempting to free the platform using the ground controls.
Do not alter or disable machine components that in any way affect safety and stability.
Do not replace items critical to machine stability with items of different weight or specification.
SAFETY RULES
Do not operate the machine in strong or gusty winds. Do not increase the surface area of the platform or the load. Increasing the area exposed to the wind will decrease machine stability.
Do not drive the machine on or near uneven terrain, unstable surfaces or other hazardous conditions with the platform raised.
Use extreme care and slow speeds while driving the machine in the stowed position across uneven terrain, debris, unstable or slippery surfaces and near holes and
Do not push off or pull toward any object outside of the platform.
|
|
|
ANSI & CSA - 4 person | 200 lbs / 890 N | |
Australia - Indoor use only - 4 person | 90 lbs / 400 N | |
Australia - Outdoor use - 4 person | 90 lbs / 400 | N |
|
|
|
|
|
|
ANSI & CSA - 4 person | 200 lbs / 890 | N |
Australia - Indoor use only - 4 person | 90 lbs / 400 | N |
Australia - Outdoor use - 2 person | 90 lbs / 400 | N |
|
|
|
Part No. 82750 | Genie | 3 |
