Operator's Manual | Third Edition • Third Printing | |
|
|
|
|
|
|
FUNCTION TESTS
Test the Steering
Note: When performing the steer and drive function tests, stand in the platform facing the steer end of the machine.
27 Press the drive function select button.
28Press and hold the function enable switch on the control handle.
29Depress the thumb rocker switch on top of the control handle in the direction identified by the blue triangle on the control panel.
Result: The steer wheels should turn in the direction that the blue triangle points on the control panel.
30Depress the thumb rocker switch in the direction identified by the yellow triangle on the control panel.
Result: The steer wheels should turn in the direction that the yellow triangle points on the control panel.
Test Drive and Braking
31Press and hold the function enable switch on the control handle.
32Slowly move the control handle in the direction indicated by the blue arrow on the control panel until the machine begins to move, then return the handle to the center position.
Result: The machine should move in the direction that the blue arrow points on the control panel, then come to an abrupt stop.
33Press and hold the function enable switch.
34Slowly move the control handle in the direction indicated by the yellow arrow on the control panel until the machine begins to move, then return the handle to the center position.
Result: The machine should move in the direction that the yellow arrow points on the control panel, then come to an abrupt stop.
Note: The brakes must be able to hold the machine on any slope it is able to climb.
18 | Genie | Part No. 82750 |
